If You Think You Understand Products, Then Read This

Three Tips for Outdoor Wood Furnace Maintenance Let’s admit it – owning an outdoor wood furnace is expensive. But don’t worry. It’s a long-term investment and lasts even longer with proper care. Below are three basic tips for outdoor wood furnace maintenance: Regular Cleaning
Learning The “Secrets” of Installations
Depending on the amount of wood you burn, the unit must be cleaned out monthly at least, sometimes more recurrently. Some units have a built in auger system that makes use of an auger to eliminate the ashes. But usually, auger just removes the ashes around it, while those that are stuck to the sides remain.
Learning The “Secrets” of Installations
When it’s time for cleaning, allow the fire to burn down and reduce to a few hot coals. With a shovel, the hot coals may be moved to one side of the firebox. Scoop up the ashes out and put them in a metal garbage container. When you have cleaned one side of the firebox, get the hot coals, pushing them to the opposite side of the firebox and removing all ashes remaining. Once you’re done, your firebox will be free of ashes and still have some remaining hot coals so you can restart your fire easily. Putting the ashes in a metal garbage container allows them to cool safely, and you can spread them in your garden (or anywhere you want) a few days later. Water Treatment Treating the water inside the unit is necessary to prevent corrosion. Untreated water considerably reduces your unit’s durability. There are various providers offer water treatment services today. Tinted water treatment is preferred by a lot of people. The tinted treatment is added until the water in the unit gets a similar tint. At this point, the process is considered complete. You just need to watch the color of the water, adding more treatment as needed. There are other treatments that work too, such as one where a test kit is needed to check if the water has been treated properly. You decide which treatment you want to use as it is all a matter of preference. Just ensure the water is treated properly, whichever treatment you pick. The right volume of water in the unit should also be maintained to avoid damage. The furnace must have a gauge that lets you check the water level easily. Corrosion Prevention Units mostly have an anode rod accessible above the furnace. It is the target of rust and corrosion, thus sparing the water jacket. Anode rods are often used in water heaters and are meant for the same purpose: to make the unit more durable. The anode rod must be inspected at least once yearly, ensuring it has remained in good shape. If it’s not, replacing it is easy.